hafele channels 14″ inch
Always construct drawer boxes
1 1/16″ smaller than the cabinet
ALWAYS USE THE SYSTEM HOLES OR MOUNTING HOLES AT THE ENDS
OF THE BREATHING TABS.
The breathing tabs allow the slide to adapt to variances in construction and materials. If you
use the hole at the base of the tab or any other non-breathing tab mounting hole, it anchors the
slide member to the cabinet and does not allow the breathing tabs to do their job.Read More
FOR FACE FRAME APPLICATIONS ONLY
THE SLIDES WILL NOT
IF THE SIDE SPACE IS LESS
MAKE SURE YOU HAVE THE CORRECT
SETBACK FOR THE CABINET AND DRAWER
MEMBERS OR THE EASY-CLOSE MECHANISM WILL
NOT ENGAGE PROPERLY.
Always reference the technical sheet for the correct
dimensions for your construction method.
When inserting the drawer, first be sure
the ball bearing retainers in the cabinet
member are fully forward. Insert the drawer
member into the cabinet member. Push the drawer
in until it is completely closed; the Easy-Close
mechanism will click and engage.
CYCLE THE DRAWER TWO OR THREE TIMES.
hafele channels comes in two quality’s and in many sizes like hafele channels 20 inch,hafele channels 18 inch,hafele channels 16 inch,hafele channels 14 inch,hafele channels 12 inch,hafele channels 10 inch
channels cost depends up on the size of channels every channel size vary s