Gurjan Plywood 710 19mm

Gurjan Plywood 710 19mm – Today plywood is not made from 2-3 different types of veneer species, but a variety of them like Gurjan, Maple, Cherry, Rubber, Mahogany and so on. You also have an alternate or combination of two veneer plywood. With the introduction of such a variety of grades and brands in plywood, many times even professionals in the same field get confused while buying.

These days low quality plywood is given a finish or color similar to that of a higher grade plywood. This makes it all the more difficult for not only home owners but also professionals to recognize the quality or grade of plywood, as well. There are commercial plywoods that are available without dipping, marine plywood, plywood’s with dipping, etc. If the commercial plywood is undergoing dipping then it becomes difficult to know the actual grade and quality of plywood. Dipping plywood is a process used to colour the plywood.

  • 100% Gurjan
  • Unextended BWP Resin
  • Borer, Termite & Fungus Proof
  • Boiling Water Proof
  • 100% Composed Core
  • High Density
  • Acoustically effective
  • 100% Lifetime Warranty on Manufacturing Defect

manufacturing process of plywood

Gurjan Plywood 710 19mm – Plywood is a material manufactured from thin layers or “plies” of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. It is an engineered wood from the family of manufactured boards which includes medium-density fibreboard (MDF) and particle board (chipboard).

All gurjan plywoods Gurjan Plywood 710 19mm bind resin and wood fibre sheets (cellulose cells are long, strong and thin) to form a composite material. This alternation of the grain is called cross-graining and has several important benefits: it reduces the tendency of wood to split when nailed in at the edges; it reduces expansion and shrinkage, providing improved dimensional stability; and it makes the strength of the panel consistent across all directions. There is usually an odd number of plies, so that the sheet is balanced—this reduces warping. Because plywood is bonded with grains running against one another and with an odd number of composite parts, it has high stiffness perpendicular to the grain direction of the surface ply.

Smaller, thinner, and lower-quality plywoods may only have their plies (layers) arranged at right angles to each other. Some better-quality plywood products will by design have five plies in steps of 45 degrees (0, 45, 90, 135, and 180 degrees), giving strength in multiple axes.

Leave a Reply

Your email address will not be published. Required fields are marked *